Lifting equipment & rigging
Crane and rigging inspection software for OSHA and ANSI/ASME B30 compliance.
Crane and rigging inspection software built for the qualified persons who run periodic inspections under OSHA 1910.179 and ANSI/ASME B30. Hovermarks turns paper inspection logs into structured digital records, captures defect severity against the device, and gives the employer an audit trail that holds up under OSHA scrutiny. Runs in any phone browser with nothing to install, installs to the home screen, signed on the day.
The challenges we hear most often
- Tracking crane, sling, and below-the-hook inspections across multiple sites
- Producing inspection records OSHA inspectors will accept by a qualified person
- Inspector name and signature on every inspection, under a tamper-evident audit trail
- Routing defects to corrective maintenance without losing the paper trail
What Hovermarks gives you
- OSHA 1910.179 and ANSI/ASME B30 inspection checklists with defect severity captured on every failed item
- Inspector name and signature captured on every inspection
- Defects automatically generate corrective maintenance work orders, routed to the responsible owner
- Per-asset annual and periodic inspection calendar with overdue alerts and email reminders
- Bulk QR-code tagging for cranes, slings, shackles, and below-the-hook devices
- Tamper-evident audit log on every signed inspection record (cryptographically chained)
- Runs in the phone browser and installs to the home screen: an in-progress submission survives a signal drop and sends when the connection returns, signed locally, nothing to install
- AuditorPack: bundle every inspection in a compliance period into one verifiable export
Use case
How a qualified person would use Hovermarks
Tag each crane, sling, shackle, and below-the-hook device with a QR code on day one. The qualified person scans and the right OSHA 1910.179 or ANSI/ASME B30 template loads on the device. Complete the inspection on the spot. Any defect classed for removal-from-service triggers a quarantine work order routed to the employer, and the device is locked out of the asset register until rectified. Background reading on intervals and competent-person definitions sits on the LOLER vs OSHA guide on the blog.
Frequently asked questions
- What does crane and rigging inspection software do?
- It gives every crane, sling, and below-the-hook device a QR-tagged identity carrying its inspection history, next-due date, and defect record. OSHA 1910.179 and ASME B30 checklists load on scan, work offline, and produce signed records with inspector name and signature, so the monthly certification trail for hooks, chains, and rope exists per asset instead of per binder.
- How much does it cost?
- From $19 per user per month on Starter and $49 on Professional, 30-day free trial, no card required, no per-inspection fees.
Stop chasing paperwork.
Start proving compliance.
Tag your first asset, run your first inspection, and pull a signed evidence pack, all on your free 30-day trial. No credit card required.